Oil Field

The environment that downhole logging tools and "measurement while drilling" tools experience during operation is perhaps the most severe of any industrial application. External pressure, long duration of high levels of vibration, severe transient impacts and rugged transportation loading all place an intense amount of stress on the delicate instrumentation that must survive for functional efficiency. Team Corporation has supplied the oilfield market vibration systems that replicate some of these extremes.

Oil Field
CUBE™
CUBE™ —

To reproduce the full spectrum of field environments by simultaneous excitation of all degrees of freedom is widely recognized as the ideal means to subject any test object to realistic stress accumulation. Team’s CUBETM is the first system to accurately produce controllable excitation up to 500 Hz in all DoF simultaneously, and remains the only system with this capability developed ... Read More

Head Expanders
Head Expanders —

Vertical excitation of a test object requires a mounting platform designed to be as stiff, yet light weight as possible; stiff to minimize influence on test results and light weight to conserve shaker force. This means the dynamic response of the mounting platform, or Head Expander must have the first mode outside the test band, or if within the test band, the response must be very well damped. Read More 

Horizontal Test System
Horizontal Test System —

As the recognized leader in high performance servo hydraulic vibration test systems, Team has considerable history developing and delivering both conventional and unique Horizontal Test Systems. Team’s solutions are typically based upon two proprietary products in Team’s arsenal of vibration components ... Read More

HydraBall
HydraBall —

The connection between a linear actuator and an articulating table is perhaps the most critical design challenge in any vibration system development. The connection must be highly transmissible, free of backlash and able to carry high forces through angular vectors. Read More

Hydraulic Power Supply
Hydraulic Power Supply —

Providing a constant supply of pressurized and properly conditioned hydraulic oil to a servo hydraulic test system, or to a hydrostatic linear bearing table, is an essential requirement for achieving desired performance and having trouble-free operation. Team designs and delivers a wide variety of Hydraulic Power Supplies (HPS) ... Read More

Large Platform Systems
Large Platform Systems —

Team’s core competency is custom system design utilizing best engineering practices and sophisticated modeling tools to ensure estimated performance targets are met. This focus has led to many firsts including the largest vibration test system ever installed, at NASA’s Plum Brook facility for subjecting full scale spacecraft ... Read More

Linear Actuators
Linear Actuators —

Team’s Linear Actuators, or HydraShakers, are a fundamental component in virtually every vibration test system delivered since the late 1950’s. Designed specifically for use in producing controllable vibration response, the HydraShaker is optimized for performance, fatigue rated and using hydrostatic bearing ...  Read More

Mantis™
Mantis™ —

The most common multi-axis test system in use today is called a MAST system, or Multi Axis Simulation Table. Very effective in reproducing measured road data, MAST systems are generally limited to fairly low frequencies, typically less than 50 Hz. And the actuator to table connection is generally a rod end bearing, prone to corrupting system response if not properly preloaded ...Read More

Pad Bearings
Pad Bearings —

Developing and applying hydrostatic bearing and coupling technology is a core competency of Team Corporation. One product unique to Team’s vibration system set of components is the Pad Bearing, a fully hydrostatic single degree of control coupling. The combination of a planar and spherical hydrostatic surface permits a highly transmissible connection in compression ... Read More

Rotary Actuators
Rotary Actuators —

Producing oscillating rotational forces on a test object, for example an axle shaft, can be accomplished by using a linear actuator and an eccentric connecting shaft. However, the most efficient means is to apply the required rotational force directly to the hub through the use of a Rotary Actuator.Read More

Spherical Couplings
Spherical Couplings —

The alignment of a linear exciter to a moving table or test object, and maintaining a highly transmissible connection, is a challenge for vibration equipment designers and installation crews. Under stress, a table or test object may experience dynamic deformation which may place eccentric loading into the exciter shaft or armature ...  Read More

T-Film Slip Tables
T-Film Slip Tables —

An outstanding example of how correct application of hydrostatic linear bearing technology can provide sizeable advantages to horizontal test systems is the T-Film Slip Table. Team’s T-Film Slip Table designs use modular hydrostatic linear bearings, operating with only 600 psi hydraulic oil supply, vs. the 3,000 psi oil typically required by hydrostatic journal bearings. Read More

T8/V8 Linear Hydrostatic Bearings
T8/V8 Linear Hydrostatic Bearings —

Defining a single line of motion while simultaneously restraining all other degrees of freedom is the function of any linear bearing. Team’s T8 & V8 Hydrostatic Linear Bearings were introduced more than 40 years ago to perform precisely that task and remain the undisputed top choice for accuracy, load carrying capacity and ruggedness.  Read More

TENSOR™ 900 & 18kN
TENSOR™ 900 & 18kN —

The TENSOR™ represents state-of-the-art advancement in multi-axis testing capability. Using 12 proprietary electrodynamic shakers to drive a single table, each TENSOR™ model can precisely control the amplitude and phase of the table response in all degrees of freedom through 2 kHz.  Read More

Vertical Test Systems
Vertical Test Systems —

Vertical test systems typically range from systems used to simulate transportation environments for package testing of consumer products to very large systems used to simulate the launch environment experienced by spacecraft. Team Corporation excels at both ends of the spectrum, producing some of the highest performance Vertical Test Systems ever delivered. Read More